Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
General Discussion / Re: AI following sloped runways in P3D
« Last post by fs1 on July 14, 2019, 07:25:36 PM »
What is the issue? The bouncing or just the warning?
When does this happen?
Thanks
22
General Discussion / Re: AI following sloped runways in P3D
« Last post by Er!k on July 14, 2019, 07:16:59 PM »
Yes with AI disabled all goes well..
23
General Discussion / Re: AI following sloped runways in P3D
« Last post by fs1 on July 14, 2019, 07:13:27 PM »
Ok thanks, somneone reported that if you turn off the AI this does not happen.
Is this correct? In this case the tug must be the one originating this issue?
In which moment does this exactly happens? Thanks
24
AIM - Suggestions / Re: Wing Flex
« Last post by PretendPilot on July 14, 2019, 06:49:35 PM »
I my opinion, wing flex on AI aircraft isn't the best idea, so an option to have it or not would be great.  Most of the time you see AI aircraft are when they are on the ground, where wing flex isn't even visible.  If you see AI planes in the air, if you are flying you really shouldn't be so close to them that you can see the wingflex anyway, so the only time you'd really appreciate the flex is if you are AI spotting.  The side effect to having the flex.. the messed up lighting.. is a pretty big price to pay for the few times you'd really see the wing flex.  My opinion, of course.. I'm sure others have their own.

I'm optimistic that FSReborn guys may have a way to fix some of the lighting issues out there, especially with FSP models.
25
General Discussion / Re: AI following sloped runways in P3D
« Last post by Er!k on July 14, 2019, 06:42:34 PM »
Can you try to save a flight and load the QW 787 as a first user aircraft?
Already did. Same issue unfortunately :(
26
General Discussion / Re: AI following sloped runways in P3D
« Last post by fs1 on July 14, 2019, 06:24:30 PM »
Can you try to save a flight and load the QW 787 as a first user aircraft?
27
AIM - Suggestions / Re: Wing Flex
« Last post by gsand on July 14, 2019, 05:25:31 PM »
Hi Kai,

FAIB does have both, al least all the ones I have downloaded for my non-AIM traffic:



Thanks Johan, didn't know about TFS.

Hope this helps.
Gerald
28
AIM - Suggestions / Re: Wing Flex
« Last post by johanfrc on July 14, 2019, 05:22:14 PM »
It actually depends.

FAIB has their NWF models which means "no wing flex".

And then we have the TFS 777 which didn't had wingflex until recently.

The only modeller out there with no non-wingflex models is FSPainter.
29
AIM - Suggestions / Re: Wing Flex
« Last post by Kaiii3 on July 14, 2019, 04:20:08 PM »
That will require a non wingflex model, as far as i know no developer has both options
30
General Discussion / Re: AI following sloped runways in P3D
« Last post by Er!k on July 14, 2019, 04:01:50 PM »
I am having an issue with this module combined with my QW787 and GSX pushback. Reported it at Avsim.com, QW forum and FSDT forum..
Pages: 1 2 [3] 4 5 ... 10